Exchange 2010 Get Out Of Jail Quick Card No Disk Space

Tepatnya tanggal 25 juni 2013

Mailbox di kantor saya full...ketika saya cek di mailboxnya..ternyata catalog datanya yang full
atau over quota, akhirnya saya menemukan solusi dari salah satu web,

sengaja saya copy paste di sini,,,,agar saya tidak lupa lagi..jika masalah itu terjadi lagi, dan mungkin teman-teman ada yang punya masalah yang sama bisa ikuti perintah di bawah ini..di jamin berhasil.

Exchange 2007/2010 Get Out Of Jail Quick Card - No Disk Space

Scenario:

Your Exchange 2007/2010 has run out of disk space on the partition holding the mailbox database and the database has dismounted, there is no quick way to increase the size of the partition, and it looks like the only solution is to move the database to another drive, which will mean downtime whilst the database is dismounted during the move.

Solution:

(A temporary fix to get the database up and running.)

In the folder where the EDB file for the affected Mailbox Database resides, there is a folder with name beginning catalogdata which can be quite large (for example - 15GB for a 250GB database):

If the Microsft Exchange Search Service is stopped by running the command

net stop MsExchangeSearch

or stopping the Microsoft Exchange Search Indexer from services.msc

then the entire catalogdata folder can be shift deleted

After this is done, DO NOT restart the Microsoft Exchange Search Service for two reasons:

1: Restarting MsExchangeSearch will cause the Full-Text Index Catalog to get rebuilt which may fill to the same size as before

2: Rebuilding the Full-Text Index Catalog can cause high CPU utilization, and is best rebuilt out of business hours

Remember this is only a temporary fix to give some breathing space whilst downtime for the mailbox database to be moved to a larger drive - or whatever - can be arranged. Free space on server disk partitions should always be monitored.

Cheers!

Further reading - How to Rebuild the Full-Text Index Catalog http://technet.microsoft.com/en-us/library/aa995966(EXCHG.80).aspx

The user profile service failed the logon. User profile cannot be loaded

 If you are a Windows admin then you should have faced this problem. While the user is logging in to their profile they will be getting the error message like “The user profile service failed the logon. User profile cannot be loaded” in Windows 7. Once enter the user name and password it will give this error message and the user can’t login but other user can login to the system without any problem.

How do we solve this issue?

I have searched it in Google and finally found the solution from Microsoft answer site. It worked for me! Just try and let me know the status.

If there is another administrator account that you can log into, then jump to step 7 after logging into that account. However, if you can’t get to any accounts at all, then start at step 1.

1. Restart your computer and hit F8 multiples times until you see a menu-like screen, if you see the Windows splash screen then repeat this step

2. Highlight and hit enter on Safe Mode with Command Prompt. Try logging in there. If it still doesn’t work, then go to step17

3. If you are able to login, once a command prompt pops up, type: net user administrator password /active:yes (you can specify whatever password you want for the administrator account.)

4. If you get a message saying “The command completed successfully”, then restart your computer by typing: shutdown -r

5. Boot up again pressing F8, but this time choose just Safe Mode.

6. You will be able to login as Administrator with the password you set in Step 3

7. Hit (windows logo)+R

8. Type regedit

9. Once the registry editor opens up, look for HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCurrentVersionProfileList

10. In the left pane, find the one that starts with S-1-5….. and ends with .BAK; if you don’t find one, skip to step 15

11. Right click it and click Rename, then change the .BAK to .BK

12. Right click the one with the same numbering but without the .BAK and add .BAK add the end

13. Right click the one that you renamed to .BK and clickRename, delete the .BK

14. Eventually, you have switched the .BAK from the end of the second entry to the first. That should probably fix your problem.

15. If you didn’t find a .BAK then try this: Open Windows Explorer to C:UsersDefaultAppDataLocalApplication Data

16. If you find another Application Data below the one you’re on, then delete it. That should probably also fix your problem.

17. If you can’t login in Safe Mode, then reboot and hit F8 until you see the menu again, then hit enter highlightingRepair Your Computer

18. Wait until all Windows Files finish loading, then hitNext when it asks keyboard language.

19. Try logging in here also, choose your user from the dropdown menu, and type the password, then jump to step 23

20. If that still doesn’t work, then if you have your Windows Installation CD still, put it in and restart your computer.

21. Hit F12 until you see a menu of boot options, choose Boot from CD

22. Choose keyboard language then hit next. Find Repair Your Computer from a little below the center left.

23. Choose Open Command Prompt and type: net user administrator password /active:yes (here again you can specify a password)

24. Close the command prompt and click Restart and jump to step 5

To disable the administrator account, type this in an elevated command prompt: net user administrator /active:no

Source of the site: Answers.microsoft.com

Jangan Kau Bimbang

karya Endar Suhendar

Cara Membuka HP Android Yang TerUnlock

Pada artikel kali ini saya akan menginformasikan cara mengatasi Samsung Galaxy Young yang tidak bisa masuk ke menu telepon atau teleponnya terkunci.Ini adalah pengalaman saya yang pernah dialami.

Hal ini bisa disebabkan oleh berbagai hal, misalnya:

1. Secara tidak sengaja Anda atau orang lain mengaktifkan fitur pengunci layar yang menggunakan pola atau password. Padahal Anda tidak mengetahui polanya / PIN / Passwordnya.
2. Pengunci layar handphone memang Anda atur untuk menggunakan pola (pattern) namun Anda lupa dan terlalu banyak memasukkan pola yang salah sehingga telepon terkunci dan meminta memasukkan akun Google.
3. Terjadi kerusakan pada salah satu aplikasi Android sehingga tidak bisa masuk ke menu.

Berikut cara untuk mengatasinya:

1. Kalau koneksi internetnya aktif dan Anda mengingat akun serta password Gmail Anda, maka untuk mengatasi Samsung Galaxy Mini yang terkunci akibat pola sangat mudah. Anda cukup memasukkan akun gmail dan password yang digunakan, beres.
2. Kalau belum muncul pilihan untuk memasukkan akun Gmail, Anda cukup melakukan percobaan pola berkali-kali hingga muncul pilihan untuk sign in akun Gmail.

Namun kalau permasalahannya akibat hal lain, misalnya akibat ada aplikasi Android yang rusak atau Anda tidak ingat akun atau password Gmail, maka untuk mengatasi masalah seperti ini Anda harus melakukan Factory Reset Samsung Galaxy Young.
Apa itu factory reset Android? Factory reset atau reset data pabrik adalah metode untuk mengembalikan handphone Android ke kondisi standar atau seperti baru keluar dari pabrik. Proses ini akan menghapus semua data dan aplikasi yang terinstall di handphone/tablet Android, termasuk akun Gmail (Google) yang terintegrasi dengan perangkat. Jika Anda ingin melakukan factory reset, sebaiknya backup dulu data-data atau file yang penting.
Berikut caranya:

1. Pastikan baterai handphone masih cukup banyak atau full
2. Matikan handphone Samsung GalaxyYoung
3. Tekan tombol HOME (tombol yang ditengah) dan tombol power + Volume Up secara bersamaan, jangan dilepas selama beberapa saat, tunggu sampai muncul logo Samsung.
4. Anda akan masuk ke menu Recovery Mode seperti tampilan diatas ini:
5.  Tekan tombol volume kebawah hingga posisi kursor berada di tulisan wipe data/factory reset
6. Tekan tombol HOME
7. Pilih yes (for all user)
8. Reboot

Setelah itu handphone akan restart dan Samsung Galaxy Young akan kembali ke settingan awal pabrik. Sebagai informasi, melakukan Factory Reset berarti menghapus semua aplikasi yang terinstall dan juga data, seperti contact, phonebook, SMS, dll. OK terima kasih..selamat mencoba.

Kamu

Siska Feat Endar

Configure Global Spare Hard Drive using HP ACU

Most of the HP Servers are shipped with HP Smart Array Storage controllers. These controllers will allow you to create and manage hardware RAID on your server. You can create, delete, migrate, expand, extend arrays using the HP Array configuration Utility (HP ACU). HP ACU also helps us to assign spare hard drive for an array.
Today, we will discuss how to assign a “Global Spare” hard drive using HP Array Configuration Utility. Global Spare hard drive is also called as Shared Spare. As the name implies, Global Spare hard drive is the hard drive which is shared across different Arrays. When we assign same spare drive to multiple arrays, it is called Global Spare.

We have already discussed about assigning dedicated Spare hard drives to an Array. If you haven’t read, please refer the below provided article to find how to assign dedicated Spare HDD to an array using ACU.

Guide: Configure Online Spare HDD using HP ACU
Please note that Array Configuration Utility will ensure that SAS hard drives can only be assigned as spare for SAS array and likewise, SATA hard drives can only be assigned to an Array which has SATA arrays. Keep in mind that an array can have several online spares, and any of these spare hard drive can be shared by several arrays. When a physical hard drive fails in an array, the Global Spare HDD will get activated and will rebuild the failed Array. In short, your data and array will be more secure when you have a Spare HDD assigned to an array.
Here, I am using HP P410i Smart Array Controller with ACU 8.6. We have 5 Unassigned Physical HDDs installed on this Server. HDDs are installed in Bay 1, 2, 3, 4 and bay 5. I will create the first array (RAID1) using the HDDs installed in Bay 1 and 2. Later, I will create another Array (RAID1) using the HDDs installed in bay 3 and 4. Once we are done, we will go ahead assign the HDD in bay 5 as a global spare (Shared spare) for both the arrays we have created.

Steps we need to follow:

Step 1: Create two Arrays and Logical Drives on your Server.
Step 2: Assign one free HDD as Global Spare (Shared Spare) to both Arrays.
Step 1: Create two Arrays and Logical Drives on your Server
If Windows OS is installed on your Server, then you can find HP Array Configuration Utility listed under Programs –> HP System Tools –> HP Array Configuration Utility. Please visit our Guide about HP Array configuration utility to understand how to launch ACU on your Server.
Guide: Configure RAID using HP ACU on your HP Server
1. Open HP Array Configuration Utility on your Server.


Here we have 5 Unassigned Physical HDDs available. HDDs are installed in Bay 1, 2, 3, 4 and Bay 5. We will use first 4 HDDs (2+2) to create two RAID 1 Array on this server. Later, we will assign remaining one HDD (bay 5) to both of these RAID 1 array as Global spare.
2. Change the View to “Physical View” (Note: This is for better understanding)

3. Select Unassigned Drives, on the left pane of window, click on Create Array.

4. Select two HDDs and Click on OK button (We selected HDDs in Bay 1 and 2)

5. Now we have created a new Array called SAS Array A (Shown below).
6. Now create a new logical drive, click on Create Logical Drive.

7. Select RAID 1 as Fault tolerance and click on Save button.

8. Now we have successfully created Logical drive 1 under SAS Array A.
9. Let us create one more Array using another 2 HDDs installed on the server
10. Click on Unassigned Drives and click Create Array

11. Select 2 HDDs and Click on OK button (We selected HDDs in Bay 3 and 4)

12. Click on OK. Now a new array called SAS Array B will be created.
13. Let us create a New Logical Drive under SAS Array B.
14. Select SAS Array B and click on Create Logical Drive.

15. Select RAID 1 as Fault Tolerance and Click Save

16. Now the Logical drive 2 is created under SAS Array B.


As shown in above provided image, we have created two RAID Array named SAS Array A and SAS Array B. We also have Logical drive 1 and Logical drive 2 created under Array A and Array B . Now we will assign the remaining free HDD in Bay 5 to both SAS Array A and SAS Array B.  Remember, we can assign Spare HDDs only to Array not to Logical drives
Step 2: Assign one free HDD as Global Spare (Shared Spare) to both Arrays
17. Now assign the Spare HDD (bay 5) to both SAS Array A and B.
18. Select SAS Array A and click on Spare Management

19. Select the unassigned HDD which is installed in bay 5 as the spare.

20. Now the bay 5 HDD is assigned as the dedicated Spare of SAS Array A (Shown below)

21. Now we will assign the same Bay 5 HDD as a spare to SAS Array B (Shared Spare).
22. Select SAS Array B and click on Spare Management

23. Now select the same Bay 5 HDD as spare for SAS Array B. Click on Save

24. Now the Bay 5 HDD will act as the spare for both SAS Array A and B.

25. Congrats, now the same HDD (Bay 5 HDD) is shared and its called as Global Spare

---

Note that we can only assign a spare hard drive to an Array. We do not have a provision to assign a spare hard drive to a logical drive. When a physical hard drive fails in an array, the spare hard drive will kick-in and will rebuild all the logical drives in that array.

Guide: Installing Windows OS using HP SmartStart 

HP SmartStart CD is available for all HP ProLiant ML/DL/SL 300, 500, and 700 Series servers and HP ProLiant BL server blades. HP SmartStart CD contains utilities like ACU, Insight Diagnostics, HP management tools and Proliant Support packs (PSP).

HP SmartStart CD provides step by step ProLiant server deployment assistance by allowing you to do assisted Windows OS installation. This CD provides an easy to use graphical interface that helps you through the OS installation process. It also helps you to install HP ProLiant server support software drivers, utilities and management agents.
Before you start the Windows installation, you need to ensure that you have created a RAID array on your Server.  Once you created RAID array and logical drive, you can go ahead and install OS on it. Please follow the step by step tutorial  provided in the below said post to create a logical drive.
Guide: Configure RAID using HP ACU on your HP Server
When you use SmartStart CD for Windows installation, it makes the OS installation process much easier because you will not be prompted to install Storage Controller drivers while installing OS. Moreover, SmartStart CD will install all necessary hardware drivers and utilities needed for your Server. If you are using HP Proliant 100 series servers, then you need to use HP Easy Setup CD to install Windows. HP SmartStart CD usually does not work with 100 series HP servers.
In this post, we are showing how to do the assisted installation of the OS using the SmartStart CD. This easy to follow step by step guide will help you to implement Windows OS on your Server for the first time.

Assisted Installation of Windows using SmartStart CD:

1. Boot the server using HP Smart Start CD (this might take some time!)
2. Select language as English (US), keyboard layout as US English and click Next button

3. Accept HP End User License Agreement by clicking Agree button.

4. Now you will be at the main page of HP SmartStart CD.
5. Under Media Option, click on Install to continue the Windows OS installation.

6. Now you will be at Boot Controller Selection window
7. Select the Controller/Logical drive from the list, click Next

8. Now you will be at Operating System Selection window.
9. Select the Windows version from the list, click Next
Note: Ensure that you select the right Windows version from the list. If you have a HP Branded OS CD (OEM) then you need to select the Windows version under HP-Branded Media Option.

10. Now you will be at Operating System Media Source window.
11. Select the Windows Installation CD location from the list. Click Next
Note: As I am mapping Windows CD using iLO Virtual Media, I have selected iLO Virtual Media as the installation Source. If you are installing from a CD/DVD, then select the right option from the list.
12. Now you will bet at Disk Partitioning Options page.
13. Select the file system (NTFS/FAT), also select the Partition size for the OS. Click Next

14. Now you will bet at Product Set Up Information page.
15. Enter Computer Name, Administrator Password and rest of the information. Click Next
Note: In Some cases, you may be prompted to enter Windows Product key as well. If prompted, please fill the Windows Product key at the same page to continue the installation.

16. Now you will bet at WBEM/SNMP Configuration page.
17. Select YES for both SNMP and WBEM Providers. Click Next
18. Now you will bet at SNMP Configuration page.
19. Leave the default settings unchanged, click Next
20. Now you will bet at WBEM Configuration page.
21. Select YES for Configure Windows firewall for Remote WMI access, click Next
22. Now you will bet at Proliant Support Pack Installation Configuration page.
23. Select Express option and click Next
24. Now you will be at Installation Information page.
25. Cross check whether correct information is showing in this window. Click Next

26. Now SmartStart CD will partition the drive and will copy necessary drivers from the CD.
27. When Prompted Insert the Windows OS CD or use iLO Virtual media to map the OS CD.

28. Accept Windows EULA by clicking Accept button. (Only if prompted)
29. Wait till  SmartStart CD finishes copying of Windows OS files to the HDD.

30. Once files are copied, the Server will be restarted.
31. Now you will see below provided screen.
32. Accept the Microsoft License Terms and click Next button

33. Wait till Windows finishes the installation.

34. Great, Windows is successfully installed on your Server, now you are ready to roar!

---

Here in this post, we have installed Windows 2008 R2 Enterprise 64 bit on a DL360 G7 Server using SmartStart CD 8.6 version. If you are installing other version of Windows, you will also need to enter Windows Product key at Step number 15.

Tutorial Amankan Data Penting dengan Cobian Backup Free

Tutorial Amankan Data Penting dengan Cobian Backup Free

Hari ini, untuk kesekian kalinya warnetku terkena masalah yang cukup serius. Operator jaga melaporkan bahwa komputer billing mati dengan tiba-tiba tanpa tahu sebabnya. Setelah dihidupkan kembali komputer memang bisa berjalan normal, namun data Billing Handycafe yang kita gunakan ternyata sudah rusak. Persoalan semakin rumit, karena ternyata sang operator lupa melakukan backup manual yang seharusnya dilakukan secara berkala. Padahal warnet kita menggunakan sistem member, dimana beberapa member memiliki waktu yang telah dibeli namun belum terpakai. Kerusakan yang terjadi pada jam sibuk membuat situasi semakin panas, akhirnya aku putuskan menggunakan data backup terakhir yang sempat disimpan.

Billing kembali berjalan dengan baik, tetapi tentu saja datanya sudah tidak akurat, beberapa member kaget saat melihat waktunya sudah nol, dan member yang waktunya kembali ada padahal harusnya sudah habis tentu diam-diam saja... hehehehe..... Untuk menjaga kepercayaan pelanggan aku putuskan mengganti waktu member yang hilang tanpa peduli mereka berbohong atau tidak.... resiko dah.... 

Untuk mencegah hal ini di kemudian hari, aku rasa perlu membuat backup data yang akurat dan otomatis. Awalnya aku berpikir menggunakan sistem syncronisasi saja, tapi belakangan dengan berbagai alasan aku putuskan menggunakan backup file sekaligus syncronisasi ke 4shared, dengan begitu kita memiliki dua backup offline dan online.

Sebenarnya Handycafe sendiri ada fungsi backup, lho kok gak dipake...??? Jujur saja, walau sudah pake Billing Handycafe lebih setahun, tapi sampai saat ini aku blom temukan cara restore backup yang disediakan oleh Handycafe. Jadi sampai hari ini tuh file backup Handycafe hanya menuh-menuhin harddisk aja....

Solusinya ??? Langsung cari beberapa aplikasi backup yang gratisan. Kok yang gratisan....? Kan cuma backup file kecil..... yang gratisan dah cukuplah... Ada banyak aplikasi backup yang gratisan, diantaranya yang sempat diuji coba adalah Allways Sync, Synback, Synkron, Comodo Backup, Ocster Backup dan terakhir Cobian Backup. Dari aplikasi-aplikasi tersebut Cobian Backup dari CobianSoft.com menjadi pilihan yang paling cocok untuk persoalan di atas.

Selain gratis, Cobian Backup cukup mudah digunakan namun juga sangat handal dan lengkap dari segi future-nya ditambah tidak rakus memori. Mungkin wajar saja, mengingat aplikasi ini dulunya adalah aplikasi berbayar. Nah... Sekarang kita langsung ke TKP....

Langkah-langkah yang akan kita jalankan adalah sebagai berikut :

Instal Cobian Backup

1.​ ​Download file Cobian Backup Free di cobiansoft.com. Di sini kita akan menggunakan versi 10 Boletus, alasannya karena versi 11 masih beta.

2. ​   Kemudian install Cobian Backup 10 dengan mengklik dua kali pada file installasinya, dan akan tampil seperti gambar di bawah ini :​

​

3.​Klik Next, sehingga muncul

​

​4.​Klik pada pilihan I accept, lalu klik Next

5.​Klik Next

​

6.​Pada Service options, pilih Use the Local System account, lalu klik Next

​

7.​Klik Yes

​

8.​Klik Next

9. Klik Done. Instalasi Cobian Backup telah selesai, saatnya kita mengatur supaya Cobian Backup  melakukan backup file-file yang kita butuhkan.

Setting Cobian Backup

Dalam hal ini kita inginkan dilakukan oleh Cobian Backup adalah mengkompress folder "db" pada folder instalasi Handycafe ke folder "Backup_Handycafe" setiap sepuluh menit dengan membuat file zip yang baru setiap kali melakukan backup. Lanjuut....

1.​ Buka aplikasi Cobian Backup, klik kanan pada Icon Cobian Backup berupa gambar jamur pada taskbar (Lihat gambar di bawah). Kemudian Klik Open.

​2.​Anda akan dihadapkan menu seperti gambar di bawah ini :

​

3.​Klik gambar jam 

​

4.​Pada Tab General, isikan Task Name dengan "Handycafe_Backup" atau nama lain yang anda inginkan, dan matikan centang pada Use Volume Shadow Copy, lalu klik Tab Files

5.Di Tab Files pada kolom Source, klik add, pilih directory, lalu arahkan ke "C:\Program Files\handyCafe\Server\Db" ini adalah folder sumber data yang akan dibackup, kemudian pada kolom Destination adalah tempat dimana file hasil backup akan ditempatkan. Untuk itu dalam hal ini kita membuat folder di drive D dengan nama Backup_Handycafe, nah sekarang arahkan ke kolom Destination ke folder tersebut. Maka tampil seperti gambar di bawah ini :

6.​Sekarang, klik Tab Schedule. 

7.​Pada kolom "Schedule type" pilih "Timer", dan pada kolom "Timer (minutes)" isi dengan 10, lalu pindah ke tab Archive.

8.​ Pada kolom Compression type, pilih Zip compression. Settingan telah selesai. Jangan lupa klik OK, supaya settingan kita tersimpan sehingga akan muncul menu seperti ini:

9.​ Sekarang kita telah memiliki satu Task bernama "Backup_Handycafe", namun task ini belum aktif, untuk mengaktifkannya klik gambar task tersebut lalu klik gambar "disket" untuk running task. Maka akan tampil menu konfirmasi seperti berikut :

10.​ Klik OK. Seharusnya, sampai di sini backup akan berlangsung setiap sepuluh menit dan akan ditandai dengan munculnya menu seperti di bawah ini di sudut kanan bawah desktop kita setiap sepuluh menit.

Selesai....................... Semoga bermanfaat.....................

NB: Folder "db" hanya menyimpan catatan transaksi di billing Handycafe, sedangkan bila ingin menyimpan settingan lain dari Handycafe seperti settingan di "option" misalnya maka sebaiknya anda juga membackup folder "server", setidaknya sekali sebulan atau setiap ada perubahan pada menu "option".

Di bawah ini adalah gambar hasil backup setelah berjalan sekitar 30 menit. Dalam hal ini folder "db" belum berisi transaksi jadi filenya masih sangat kecil.

​Download : Cobian Backup Free Version 10 Boletus